English
  • 中文
  • English

Introduction & Operating Principles of Vacuum Fluorescent Display

Time: 2012-09-11 11:45:00

Author: ZHEJIANG GOVSA TECHNOLOGY CO., LTD.

Click:

                                              
                                                                                                                        Pic. 1                                                                                                     Pic. 2 



                                                                                                                                                       Pic. 3

 

VACUUM FLUORESCENT DISPLAY (VFD), evolved from the VACUUM tube DISPLAY device by the launch of the electron cathode (straight heat type, generally referred to as the filament), accelerate the control of the electron flow gate, print on the glass electrode and anode of phosphor and reseau and glass cover.It USES electronic impact phosphors, illuminates phosphors, is a kind of self luminous display device. Because it can do many color display, high brightness, and can be driven with low voltage, easy to form a complete set of integrated circuit, so is widely used in household appliances, office automation equipment, industrial instrumentation and in various fields such as cars. VFD according to the structure of the general can be divided into 2 pipe and 3 two; According to the display content can be divided into: digital display, character, design, display, dot matrix display; According to the drive mode can be divided into: static drive (dc) and the dynamic drive (pulse).

VFDs variety, with one of the most widely used 3 diode structure as an example shows that the basic structure and principle.Figure 1 is the decomposition of strabismus VFDS structure diagram, figure 2 to section, the structure with glass cover and the base plate to form a vacuum container, in a vacuum container to CATHODE CATHODE FILAMENT FILAMENT, GRID ANODE ANODE GRID and as the basic electrodes, and some other parts (such as getter device, etc.). Filament is in not impede show very fine tungsten filament core line, Shanghai juji on barium (Ba), strontium (Sr), calcium (Ca) oxide carbonate (3 yuan), again with proper tension mounted on the filament stents (fixed end) and spring (moving), at both ends and the filament voltage, the radiation thermionic cathode temperature of 6000 c or so.Grid is also in line with the principles of not impede display, will be the light etching stainless steel sheet (PHOTO - ETHING) after the forming of metal grid (MESH), on which the combined with positive voltage, can accelerate to radiate and spread since the filament is electronic, the orientation of the anode; On the contrary, if plus negative voltage, could oppose electronic, swam to the anode anode extinction.Graphite anode refers to the form generally display patterns such as conductor, according to show the shape of the pattern printing phosphor, plus a positive voltage applied to the later, because of the grid and the effect of acceleration, the spread of the electron will impact each other and stimulate phosphor, make it shine.Figure 3 indicates that the basic working principle. Light color for the green (peak wavelength 505 nm), low working voltage of the ZnO: zinc (ZnO: zinc) phosphor is currently the most widely used fluorescent powder. In addition, by changing the types of phosphor powder, can obtain all kinds of different color red orange to blue.In addition to the above three basic electrode, as shown in figure 2, the glass cover inner surface form transparent conductive film (NESA), and connected to the filament voltage or potential, can prevent the formation of electrostatic shielding layer for external electrostatic effect and lower the quality of display.Figure 1 the GETTER device (GETTER) is one of the important parts to maintain the vacuum. In the last stage of the exhaust engineering, can use with the eddy current loss caused by high frequency getter device heating, on the inner surface of the glass cover form barium evaporation film, can be used to further the absorption tube of residual GAS.

Introduction & Operating Principles of Vacuum Fluorescent Display
Long by picture save/share
0

更多资讯

GOVSA

Copyright ©2010 All Rights Reserved GOVSA (KINGHIGH)

Copyright ©2010 All Rights Reserved GOVSA (KINGHIGH)


Contact +

Tel:0751-88234791

Mail:service@kinghigh.com.cn

Address:Building 3, Global Research Center for Flexible Electronics & Intelligent Technology, No.1002, 23rd Avenue, Qiantang New Area, Hangzhou.

Contact +

Tel:0751-88234791

Mail:service@kinghigh.com.cn

Address:Building 3, Global Research Center for Flexible Electronics & Intelligent Technology, No.1002, 23rd Avenue, Qiantang New Area, Hangzhou.

Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.