English
  • 中文
  • English

VFDs is the best choice to replace LCDs

Time: 2016-12-20 11:41:00

Author: ZHEJIANG GOVSA TECHNOLOGY CO., LTD.

Click:

1.Illuminated display, so significantly increased visibility

VFDS = good visibility + product upgrades

The biggest characteristic of VFDS are illuminated. No back light, with a LCD incomparable wide visual Angle, to adapt to the high temperature and high humidity of harsh working environment, and has a good response speed.

In addition, VFDS blue-green light emitting light is downy, showing high grade, is helpful to upgrade the product.

(1) without being limited by the perspective

No matter look from the front or from different sides, Angle change does not affect the contrast, wide viewing angles.  

(2) is not restricted by environment

No backlighting, light of spontaneous writing is clear and bright, is completely suitable for display in dark environment.

(3) should way performance at a high speed

Reply much faster than LCD products, at the same time, has the characteristics of resistance to high temperature and high humidity environment.

2. Save power function

Same size and power consumption of LCD is roughly same, VFDS consumption of electricity and the use of LCD backlight mode is roughly same, also have] [power saving mode, can be displayed without open, which can reduced the consumption of current below a few mA, achieve the goal of more energy efficient.

3. wide working temperature range

Complete adaptation - 40 to 85 degrees of harsh working environment, abnormal is displayed on LCD may occur under low temperature, high temperature environment also can ensure reliable work.  

4. color filter can be used to change color

VFDS blue-green luminous color has the characteristics of high brightness values, wide wavelength range, can through the color filter is very easy to change color, and adding filter can obviously increase the content and background of contrast, making the show more clearly.

5. the appearance of the same size as the LCD

(1) compared with general LCD module appearance size, the same mounting holes position

Has the common LCD module and the appearance of the same size as well as the installation hole, slot position, can be easily assembled into the existing framework without modification, achieve the purpose of saving development cost, shorten the development cycle.

(2) all of the same size as the LCD VFDS

Offers a variety of specifications [column x line] VFDS module, and the exterior size compatible with common LCD module. Specifications, please refer to the product specification.

6.basically do not need to change circuit, or only minimal changes

(1) to use with general LCD module 14 needle stitch position identical parallel interface

(2) do not need backlight power supply and contrast adjustment circuit

VFDS is illuminated display device, so no back light, and contrast adjustment circuit, luminous brightness can be adjusted easily through software scale.

(3) perfect simulation HD44780 and KS0066 dedicated LCD control chip.

(4) the signal terminals are VFDS module side connected with resistance.  

7.with LCD modules have the same instruction set, the program change homework to a minimum

(1) with LCD module instruction set are interchangeable

Character type CU - U series VFDS module, with 4/8 of the common parallel LCD module (HD44780 / HD66712, etc.) are interchangeable, existing LCD procedures can get the best use of resources.

(2) can be closed by a command shows the power supply, so that we can without shows deep cuts in spending power, more to save energy.

(3) using the same parallel interface and LCD, so don't need to change the existing communication control design. (about the processing time difference problem please refer to the user guide, specifications, etc.)

 


VFDs is the best choice to replace LCDs
Long by picture save/share
0

更多资讯

GOVSA

Copyright ©2010 All Rights Reserved GOVSA (KINGHIGH)

Copyright ©2010 All Rights Reserved GOVSA (KINGHIGH)


Contact +

Tel:0751-88234791

Mail:service@kinghigh.com.cn

Address:Building 3, Global Research Center for Flexible Electronics & Intelligent Technology, No.1002, 23rd Avenue, Qiantang New Area, Hangzhou.

Contact +

Tel:0751-88234791

Mail:service@kinghigh.com.cn

Address:Building 3, Global Research Center for Flexible Electronics & Intelligent Technology, No.1002, 23rd Avenue, Qiantang New Area, Hangzhou.

Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.